Wall Panels

1. Custom Acoustical products Wall Panels should be installed in accordance with the manufactuer”s recommedations.

 

2. All necessary hard ware and accessories for a complete job installation are to be furnished by the contractor.

 

3. Installation of wall Panels shall not begin work until all wet work such as plastering, concrete, ect., is completely dry. The panels are designed for installation under standard occupancy conditions from 60 degrees F. to 85 degrees F. and at not more than 80% R.H. in an enclosed building.

 

4. The contractor shall be responsible for the examination of all surfaces and conditions prior to the accoustical wall panel installation.

  

1. The Wall Panels shall be pre finished by Custom Acoustical Products and shall be type (Echo Stopper) (Impact Resistant) (Reflective) (Tackable).

 

2. Core Material shall be (specify thickness) in thickness and in the exact height, width, and shape detailed on the drawings.

 

3. Edge detail shall be (Square) (Radius) (Bevel) ( Half Bevel) (Custom)

 

4. The face, all edges, and return on the back of a minimum of 1″ shall be finished with  (Select material, pattern, color)

 

5. The Wall Panels shall be mounted utilizing (Mounting Adhesive) (Impaling Clip) (Mechanical Clip) (Hook and Loop Fasteners) (Concealed Splines).

 

6. Wall Panels Shall Have a Noise Reduction Coefficient (N.R.C.) od ____ using Astm C423-81a, Sound Absorption and Sound Coefficent by Reverberation Room Method.

 

7. All components utilizd in the construction of these wall panels meet a Class ! (0-25) rating as tested per ASTM E-84-81a, Surface Burning Characteristics of Building Materials.

 

PART 1 GENERAL

PART 1 GENERAL

• 1.1 SECTION INCLUDES A. Acoustical ceiling and wall treatment      
• 1.2 PERFORMANCE REQUIREMENTS A. Acoustical ceiling and wall treatment components meet _______________ rating in accordance with __________.      
• 1.3 SUBMITTALS
• A. Comply with requirements of Section 01330- Submittal Procedures      
• B. Product Data: Submit manufacturer”s product data, including installation instructions and maintenance directions.      
• C. Samples: Submit 12×12 inch sample to show core material, edge and corner details, finish, and mounting hardware, for approval by Architect.      
• 1.4 DELIVERY, STORAGE, AND HANDLING A. Delivery: Deliver materials to site in manufacturer”s original, unopened containers and packaging, with labels clearly indicating manufacturer and material.      B. Storage: Store materials in a dry area indoors, protected from damage and in accordance with manufacturer”s instructions.      C. Handling: Protect materials and finishes during handling and installation to prevent damage.      
• 1.5 PROJECT CONDITIONS A. Do not install ceiling and wall treatment until all wet work, such as plastering, concrete, and masonry, is completely dry.      B. Install ceiling and wall treatment at air temperature between 60 and 85 degrees F, at maximum relative humidity of 80 percent, and in an enclosed building      Materials      The Wall Panels shall be pre finished by Custom Acoustical Products and shall be type (Echo Stopper) (Impact Resistant) (Reflective) (Tackable).      Core material shall be (specify thickness) in thickness and in the exact height, width, and shape detailed on the drawings.      Edge detail shall be (Square) (Radius) (Bevel) (Half Bevel) (Custom).      The face, all edges, and return on the back of a minimum of 1€ shall be finished with (select material, pattern, color).      The Wall Panels shall be mounted utilizing (Mounting Adhesive) (Impaling Clip) (Mechanical Clip) (Hook and Loop Fasteners) (Concealed Splines).      Wall Panels shall have a Noise Reduction Coefficient (N.R.C.) of_____ using ASTM C423-81a, Sound Absorption and Sound Coefficient by the Reverberation Room Method.      All components utilized in the construction of these wall panels meet a Class 1 (0-25) rating as tested per ASTM E-84-81a, Surface Burning Characteristics of Building Materials.

SHORT FORM GUIDE SPECIFICATIONS

(NOTE: This form covers most  Wall and Ceiling Products and is designed to be edited to suit the user”s requirements)    

 PART 1 GENERAL

1.1 SECTION INCLUDES A. Acoustical ceiling and wall treatment      

1.2 PERFORMANCE REQUIREMENTS A. Acoustical ceiling and wall treatment components meet _______________ rating in accordance with __________.      

1.3 SUBMITTALS A. Comply with requirements of Section 01330- Submittal Procedures      B. Product Data: Submit manufacturer”s product data, including installation instructions and maintenance directions.      C. Samples: Submit 12×12 inch sample to show core material, edge and corner details, finish, and mounting hardware, for approval by Architect.      

1.4 DELIVERY, STORAGE, AND HANDLING A. Delivery: Deliver materials to site in manufacturer”s original, unopened containers and packaging, with labels clearly indicating manufacturer and material.      B. Storage: Store materials in a dry area indoors, protected from damage and in accordance with manufacturer”s instructions.      C. Handling: Protect materials and finishes during handling and installation to prevent damage.      

1.5 PROJECT CONDITIONS A. Do not install ceiling and wall treatment until all wet work, such as plastering, concrete, and masonry, is completely dry.      B. Install ceiling and wall treatment at air temperature between 60 and 85 degrees F, at maximum relative humidity of 80 percent, and in an enclosed building.      

PART 2 PRODUCTS

• 2.1MANUFACTURER      A.Cusom Acoustical Products      
• 2.2 ACOUSTICAL CEILING AND WALL TREATMENT A. ACT Absorptive wall Panels: One piece of 7 pcf [1/2 inch – 10 pcf] noncombustible and dimensionally stable glass fiber core, [1/2] [3/4] [1] [1-1/2] [2] [3] [4] inches thick. 1. Edges: [Square] [Radius] [Bevel] [Half-bevel], with [chemically hardened]metal] [wood] internal edge protection. 2. Corners: [Square] [Radius]. 3. Finish: [Nonwoven polyester fabric] [Woven polyester fabric] [Perforated vinyl] [Manufacturer approved custom fabric] covering the face, all edges, and a return on the back of a minimum of 1-1/2 inches.      4. Mounting; [Wall Adhesive] [Hook and loop fasteners] [Mechanical clips] [Magnetic fasteners] [Concealed splines] [Impaling clips].      5. Noise Reduction Coefficient (NRC), ASTM C 423: [0.90-1.00] [1.10] [1.15].      B.  High Impact Acoustical Wall Panels: One piece of 7 pcf noncombustible and dimensionally stable glass fiber core laminated with 1/8 inch high impact resistant, 16 – 20 pcf molded glass fiber board, [5/8] [7/8] [1-1/8] [1-5/8] [2-1/8] [3-1/8] [4-1/8] inches thick.      1. Edges; [Square] [Radius] [Bevel] [Half-bevel], with [chemically hardened][metal] [wood] internal edge protection.      2. Corners; [Square] [Radius].      3. Finish: [Nonwoven polyester fabric] [Woven polyester fabric] [Perforated vinyl]      [Manufacturer approved custom fabric] covering the face, all edges, and a return on the back of a minimum of 1-1/2 inches.      4. Mounting: [Wall Adhesive] [Hook and loop fasteners] [ Mechanical clips] [Magnetic fasteners] [Concealed splines] [Impaling clips].      5. Noise Reduction Coefficient (NRC), ASTM C 423: [0.90 -1.00] [1.00] [1.15].      C. Reflective Wall Panels: One piece of particleboard or gypsum board, [1/2] [5/8] [3/4] [1] [1 -1/2] [2] inches thick.      1. Edges: [Square] [Radius] [Bevel] [Half-bevel].      2. Corners: [Square] [Radius].      3. Finish: [Nonwoven polyester fabric] [Woven polyester fabric] [Perforated vinyl] Manufacturer approved custom fabric] covering the face, all edges, and a return on the back of a minimum of 1-1/2 inches.      4. Mounting: [Wall Adhesive] [Mechanical clips].      D. Minact Mineral Board Absorptive Wall Panels: One piece of perforated mineral fiberboard, 3/4 inch thick nominal.      1. Edges: [Square] [Radius] [Bevel] [Half-bevel].      2. Corners: [Square] [Radius].      3. Finish: [Nonwoven polyester fabric] [Woven polyester fabric] [GenCorp Web Core      vinyl] [Manufacturer approved custom fabric] covering the face, all edges, and areturn      on the back of a minimum of 1-1/2 inches.      4. Mounting: [Wall Adhesive] [Mechanical clips] [Concealed splines] [Hook and loop fasteners].      5. Noise Reduction Coefficient (NRC), ASTM C 423: 0.55 – 0.65.      E.Resist Acoustical Wall Panels: One piece of 6 pcf noncombustible, abuse resistant, resilient, and dimensionally stable glass fiber core, [1-1/8] [1-5/8] [2-1/8] inches thick.      1. Edges: [Square] [Radius] [Bevel] [ Half-bevel].      2. Corner: [Square] [Radius].      3. Finish: Nonwoven polyester fabric covering the face and the vertical edges. Wrap top and bottom if exposed.      4. Mounting: [Wall Adhesive] [Hook and loop fasteners] [Mechanical clips] [Concealed splines].      5. Noise Reduction Coefficient (NRC), ASTM C 423: [0.85 – 0.95] [1.10].      (NOTE: This form covers most  Wall and Ceiling Products and is designed to be edited to suit the user”s requirements)      F.  Tackable Wall Panels: One piece 7 pcf noncombustible and dimensionally stable glass fiber core laminated with [1/8] [1/4] inch core surface, [5/8] [3/4] [7/8] [1] [1-1/8] [1-1/4] [1-5/8] [2-1/8] [2-1/4] inches thick. 1. Edges: [Square] [Radius] [Bevel] [Half-bevel], with chemically hardened internal edge protection. 2. Corners: [Square] [Radius] 3. Finish: [Nonwoven polyester fabric] [Woven polyester fabric] [Perforated vinyl] [manufacturer approved custom fabric] covering the face, all edges and a return on the back of a minimum of 1-1/2 inches. 4. Mounting: [Wall Adhesive] [Hook and loop fasteners] [Mechanical clips] [Magnetic fasteners] [Concealed splines] [Impaling clips]. 5. Noise Reduction Coefficient (NRC), ASTM C 423: 7/8 inch, 0.45 – 0.55. G. ACT- Tack Acoustical, Tackable Wall Panels: One piece of 7 pcf noncombustible and dimensionally stable glass fiber core laminated with 1/8 inch tackable, 16 – 20 pcf molded glass fiber board, [5/8] [7/8] [1-1/8] [1-5/8] [2-1/8] inches thick. 1. Edges: [Square] [Radius] [Bevel] [Half-bevel], with [chemically hardened] [metal] [wood] internal edge protection 2. Corners: [Square] [Radius]. 3. Finish: [Nonwoven polyester fabric] [Woven polyester fabric] [Perforated vinyl] [Manufacturer approved custom fabric] covering the face, all edges, and a return on the back of a minimum of 1-1/2 inches, 4. Mounting: [Wall Adhesive] [Hook and loop fasteners] [Mechanical clips] [Magnetic fasteners] [Concealed splines] [Impaling clips]. 5. Noise Reduction Coefficient (NRC) ASTM C 423: [0.90 – 1.00] [1.00] [1.15]. H. Respond Tack Wall Panels: One piece of high-density mineral fiber board, [3/8] [1/2] [5/8] inch thick. 1. Edges: [Square] [Radius] [Bevel] [Half-bevel]. 2. Corners: [Square] [Radius]. 3. Finish: [Nonwoven polyester fabric] [Woven polyester fabric] [Vinyl] [Manufacturer approved custom fabric] covering the face, all edges, and a return on the back of a minimum of 1 -1/2 inches. 4. Mounting: [Wall Adhesive] [Hook and loop fasteners] [Mechanical clips] [Concealed splines -5/8] I. Respond Acoustical Ceiling Panels: [One piece of 7 pcf noncombustible and dimensionally stable glass fiber core] [One piece of 7 pcf noncombustible and dimensionally stable glass fiber core with foil back] [ Perforated mineral board] [Perforated mineral board laminated to 1 piece of 7 pcf noncombustible and dimensionally stable glass fiber core] [Gypsum board laminated to 1 piece of 7 pcf noncombustible and dimensionally stable glass fiber] 1. Thickness: [Glass fiber [3/4] [1] [1-1/2] inches][Mineral Board 7/8 inch]. 2. Edges: [Square edge] [Standard reveal] [Flush reveal]. 3. Finish: [Nonwoven polyester fabric] [Woven polyester fabric] [Perforated vinyl] [Manufacturer approved custom fabric] covering [face for square edge lay-in] [face and edges for reveal] [face, all edges, and a return on the back of a minimum of 1-1/2 inches]. 4. Noise Reduction Coefficient (NRC) ASTM C 423: [0.65 – 0.75] [0.85 – 0.95] [0.90 – 1.00]. J. Respond Ceiling Clouds: One piece of 7 pcf Noncombustible and dimensionally stable glass fiber core, [3/4] [1] [1-1/2] [2] inches thick. 1. Edges: [Square] [Radius] [Bevel] [Half-bevel], with chemically hardened internal edge protection. 2. Corners: [Square] [Radius] 3. Finish: [Nonwoven polyester fabric] [Woven polyester fabric] [Perforated vinyl] [Manufacturer approved custom fabric] covering the face, all edges, and a return on the back of a minimum of 1-1/2 inches.      4. Mounting: Suspended horizontally with clip / eyelet combination.      5. Noise Reduction Coefficient (NRC), ASTM C 423: [0.90 – 1.00] [1.10]      K. Respond Ceiling Baffles – Type 1: One piece of 7 pcf noncombustible and dimensionally stable glass fiber core, [1/2] [3/4] [1] [1-1/2] [2] inches thick.      1. Edges: [Square] [Radius], with chemically hardened internal edge protection      2. Corners: Square.      3. Finish: [Nonwoven polyester fabric] [Woven polyester fabric] [Manufacture approved      custom fabric] covering the faces and all edges.      4. Mounting: Suspended vertically with eyehooks      5. Sound Absorption, ASTM C 423: [1 inch, 1.30 sabins per square foot] [2 inches, 1.75      sabins per square foot].      L. Respond Ceiling Baffles – Type II: Two pieces of 7 pcf noncombustible and      dimensionally stable glass fiber core, [1] [1-1/2] [2] inches thick.      1. Edges: [Square] [Radius], with chemically hardened internal edge protection.      2. Corners: [Square] [Radius]      3. Finish: [Nonwoven polyester fabric] [Woven polyester fabric] [Perforated vinyl]      [Manufacturer approved custom fabric] covering the faces and all edges.      4. Mounting: Suspended vertically with D-rings.      5. Sound Absorption, ASTM C 423: [1 inch, 1.30 sabins per square foot] [2 inches, 1.75      sabins per square foot].      M. Respond Ultimate 2000 Ceiling and Wall Panels: Panels shall be constructed of a composite core of stable rigid 6 pcf fiberglass and an HIL (high impact layer) of laminated fiberglass. Thickness: [5/8] [7/8] [1-1/8] [2-1/8] inches thick.      1. Edge profile: [Square] [Bevel] [Miter] [Custom (specify)].      2. Edge treatment: [resin hardened] [aluminum (square edge only)] [wood (all profiles)] [Custom (specify)].      2. Corner detail: [Square] [Radius] [Custom (specify)]      3. Finish: Panel finish shall be [specify fabric manufacturer, pattern, color]. Finish shall be applied directly to the face and edges of the panel and return to the back of the panel to provide a full finished edge,      4. Mounting: [Adhesive] [Z-clips] [Splines] [Custom (specify)]. Adhesive, fasteners, standard wall leveling angle, are to be supplied by the contractor. All other mountings to be provided by the manufacturer.      5. Noise Reduction Coefficient Minimum NRC of ____ in accordance with ASTM C 423 (type “A” mounting).      N. Respond Tedlar Encapsulated Ceiling and Wall Panels: [One piece of 7pcf noncombustible and dimensionally stable glass fiber core] [Perforated mineral fiberboard], [1] [1-1/2] [2] inches thick.      1. Edges and Corners: Square.      2. Finish: white Dupont Tedlar polyvinyl fluoride film totally encapsulating all faces and edges.      3. Mounting: [Wall adhesive] [Hook and loop fasteners] [Z-clips] [Lay-in].      4. Noise Reduction Coefficient (NRC) ASTM C 423 1 inch, 0.70-0.80.             O. Respond Tedlar Faced Ceiling Panels: One piece of gypsum board, 1/2 inch thick.      1. Edges and Corners: Square.      2. Finish: White Dupont Tedlar polyvinyl fluoride film covering face, edges, and onto back.      3. Mounting: Lay-in      P. Respond Tedlar Baffles: Two pieces of 7 pcf noncombustible and dimensionally stable glass fiber core, 2 inches thick.      1. Edges and Corners: Square.      2. Finish: White Dupont Tedlar polyvinyl fluoride film totally encapsulating all faces and edges.      3. Mounting: Suspended vertically with D-rings.      Q. Respond Quiet Louver: One piece of 7 pcf noncombustible and dimensionally stable glass fiber core, 3/4 inch thick 1. Panel Edges; Square, with chemically hardened internal edge protection. 2. Panel Corners: Square. 3. Panel Finish: [Nonwoven polyester fabric] [Woven polyester fabric] [Perforated vinyl] [Manufacturer approved custom fabric] covering the face, all edges and a return on the back of a minimum of 1-1/2 inches. 4. Wood Louvers: [Square] [Radius] design. Attach directly to and overlap seams of acoustical panels. 5. Louver Spacing: [1-5/16] [13/16] [9/16] inch. 6. Louver Height: [1-5/16] [1-1/8] inches. 7. Louver Width: 11/16 inch. 8. Wood: [Red Oak] [Aspen] [Maple] [__________]. 9. Wood Stain: [Fruitwood] [Walnut] [Mahogany] [_____________]. 10. Wood Finish: [Lacquer] [Class A] [____________]. 11. Panel Mounting: [Adhesive] [Z-clips] [Splines]      R. Respond Geometrix Sound Absorbers: one piece of 7 pcf noncombustible and dimensionally stable glass fiber core with low density glass fiber, wood supports, 1 inch thick, 16 inch diameter [half round] [quarter round]. 1. Edges and Corners: Square. 2. Finish: [Nonwoven polyester fabric] [Woven polyester fabric] [Manufacturer approved custom fabric] covering the face , all edges, and a return on the back of a minimum of 1-1/2 inches. 3. Mounting; [Adhesive] [Z-clips]. 4. Noise Reduction Coefficient (NRC) ASTM C 423: 1.25 S. Respond Reflective Ceiling Clouds: 1. Curved panel: Rigid, molded fiberglass covered with white gel-coat and painted. 2. Flat Panel: Particle board, 3/4 inch thick, wrapped with Guilford FR-701 woven polyester or Koroseal Desert Sand vinyl. 3. Edges and Corners: Square 4. Mounting: Hanger assembly.      
• PART 3 EXECUTION
• 3.1 EXAMINATION A. Inspect areas to receive ceiling and wall treatment. Notify Architect of conditions that would be adversely affect the installation or subsequent utilization of the ceiling and wall treatment. Do not proceed with installation until unsatisfactory conditions are corrected.
• 3.2 INSTALLATION A. Install ceiling and wall treatment at locations indicated on the drawings and accordance with manufacturer”s instructions. B. Install ceiling and wall treatment plumb, level, square, in alignment with adjacent work, and secure.
• 3.3 CLEANING A. Clean ceiling and wall treatment surfaces in accordance with manufacturer